The conducted research studies presented the possibility for the production of nitrogen – sulphur – calcium fertilizers based on urea and phosphogypsum by granulating the urea and phosphogypsum pulp with dried recirculation. The obtained granulate was dried, and then sieved to achieve an adequate particle-size distribution. Subgrain and ground sieve residue were returned to the granulation unit. The pulp can be formed using solid urea and phosphogypsum with high water content, e.g. from ZCh “POLICE” S.A. or using technical urea solutions (CO(NH ) 70 wt. %) and any phosphogypsum. In the second case, the application of phosphogypsum with the lowest possible water content seems to be the most reasonable. The application of proper additives is required to obtain the desired hardness of granules. The additive of partly decomposed magnesite was found to cause the increase in the hardness of obtained granulates with 2% of MgO total content – the content at which this element can be guaranteed in the fertilizer. Magnesite can be partly decomposed with sulphuric acid at the stage of pulp formation. The increase in hardness of adduct-type fertilizer granules can be also achieved by adding 5 wt. % of bentonite in the dried granulate to the granulation unit.
The agriculture tests for field crops of cereals have indicated that, regarding the yield forming effect, the obtained fertilizer is nitrogen fertilizer which does not differ considerably from the pure form of ammonium sulphate applied in two doses, and is more effective than the pure urea for pre-plant application. The retarded release of nutrient elements allows for the pre-plant application of the total content of nitrogen in one dose, which reduces the number of treatments and cultivation costs.
2012 Borowik Production technology of nitrogen-sulphur-calcium fertilizers on the base of urea and phosphogypsum
Share this on:
Twitter
LinkedIn
Views: 10